Reply To: How to expand the frequency band of Zone 3?

Forum Forums SIGFOX How to expand the frequency band of Zone 3? Reply To: How to expand the frequency band of Zone 3?

#154
joe.hou
Participant

The module uses 36KHz frequency band as default. You may issue the SPI command Set_FCC_Macro_Channel right after the Change_To_RCZ3 command with the following parameters to change the band to 192KHz.
config_words[0] =[0x00000003]
config_words[1] = [0x00001388]
config_words[2] = [0x00000100]
default_channel_config= 0

Please refer to “SN10-1x Software Development Guide” for detail.