How to expand the frequency band of Zone 3?

Forum Forums SIGFOX How to expand the frequency band of Zone 3?

This topic contains 1 reply, has 1 voice, and was last updated by  joe.hou 1 year, 9 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #152

    joe.hou
    Participant

    How to expand the frequency band of Zone 3 from 36KHz to 192KHz?

    • This topic was modified 1 year, 9 months ago by  joe.hou.
    #154

    joe.hou
    Participant

    The module uses 36KHz frequency band as default. You may issue the SPI command Set_FCC_Macro_Channel right after the Change_To_RCZ3 command with the following parameters to change the band to 192KHz.
    config_words[0] =[0x00000003]
    config_words[1] = [0x00001388]
    config_words[2] = [0x00000100]
    default_channel_config= 0

    Please refer to “SN10-1x Software Development Guide” for detail.

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.