Is it OK to supply regulated 1.875V to BM15 module? Forum › Forums › Wireless › Is it OK to supply regulated 1.875V to BM15 module? This topic contains 2 replies, has 2 voices, and was last updated by Admin #1 2 years, 7 months ago. Viewing 3 posts - 1 through 3 (of 3 total) Author Posts 2017-12-19 at 09:28:06 #132 joe.houParticipant Is it ok to supply regulated 1.875V to BM15 module? The nominal voltage of the regulator is 1.9V. However considering the tolerances of the passive components, the voltage could vary slightly across boards. 2017-12-19 at 09:40:08 #133 joe.houParticipant No, it is not OK. It will work in room temperature but failed in our extreme temperature test. 2018-03-26 at 11:07:02 #193 Admin #1Keymaster Can you advice the antenna design? Author Posts Viewing 3 posts - 1 through 3 (of 3 total) You must be logged in to reply to this topic.