PCB Footprint for BM15_AN R2

Forum Forums Wireless PCB Footprint for BM15_AN R2

This topic contains 1 reply, has 2 voices, and was last updated by  lion.wang 9 months, 3 weeks ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #348

    drewoprea
    Participant

    In revision 1.4 of the BM_15AN R2 product specification you recommend not running traces under the module to avoid interference. ( Pg 14 Layout Note: Do not route any trace under module to avoid
    interference. ) https://www.texim-europe.com/getfile.ashx?id=117984

    Is it required that there be no traces under the module on EVERY layer, or is it allowed to place traces behind a ground pour?

    #352

    lion.wang
    Keymaster

    Hi Drewoprea,

    There are some PCB footprint information in “BM15 Antenna Placement Guide”.
    You can download it from our download center website.
    https://www.innocomm.com/download.aspx

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.