Should I cut off the power to the SN10-1x module when it is not used?

Forum Forums SIGFOX Should I cut off the power to the SN10-1x module when it is not used?

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #128
    joe.hou
    Participant

    Should I cut off the power to the SN10-1x module or just put it in sleep mode when it is not used?

    #131
    joe.hou
    Participant

    SN10-1x module consumes only 2.2 micro amp (zone 1 & 3) and 4.4 micro amp (zone 2 and zone 4) when it is standby. It should be enough to put it in sleep mode unless you have a very tight budget for power consumption.

Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.