WB15EVK hardware information

Forum Forums System-on-Module WB15EVK hardware information

This topic contains 1 reply, has 1 voice, and was last updated by  ohporter 9 months, 1 week ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #484

    ohporter
    Participant

    Hello,

    I was able to figure out the password to access the quickstart guide and Yocto Project software release. However, I’m trying to find hardware information on the carrier board like the 40 pin expansion header pinout and configuration of the ethernet PHY, etc. A schematic would be useful.

    Following a post about another board I registered for a separate innocomm.com login id to obtain this info but my account has never been enabled after many weeks. Any suggestion on how to proceed? I’m ready to interface some peripherals to this board but need the info to make it useful.

    Regards,
    Matt

    #485

    ohporter
    Participant

    Shortly after posting here my account was activated and I have the hardware info I need. Thanks for the quick resolution!

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.