alexlin_1

Forum Replies Created

Viewing 14 posts - 1 through 14 (of 14 total)
  • Author
    Posts
  • in reply to: Circuit diagram #408
    alexlin_1
    Participant

    I need gpio control another board, so i need I.MX8M board circuit SCH.

    in reply to: Circuit diagram #407
    alexlin_1
    Participant

    I need gpio control another board, so i need I.MX8M board circuit.

    in reply to: usb camera yuv422 to rgb888(framebuffer) #405
    alexlin_1
    Participant

    Hi, Lion,

    TKS your help!
    I will research the forum.

    in reply to: bitbake ffmpeg error #404
    alexlin_1
    Participant

    it’s ok,
    i had fix this question

    LICENSE_FLAGS_WHITELIST = “commercial”

    in reply to: sd card booting error #399
    alexlin_1
    Participant

    hi lion,

    opencv environment is ok, tks!

    Alex

    in reply to: sd card booting error #398
    alexlin_1
    Participant

    Hi lion,

    could you ask the vender?
    send me your wechat info to my mail.

    Alex

    in reply to: sd card booting error #396
    alexlin_1
    Participant

    Hi lion,
    sdcard is ok!
    now the question is OPENCV environment, follow your webpage its for imx6, now i try wayland, don’t have any idea to build the environment, any command?

    Alex

    in reply to: sd card booting error #394
    alexlin_1
    Participant

    hi Lion,

    I had seen that page,but core-image-x11 , imx8m not support.

    in reply to: sd card booting error #392
    alexlin_1
    Participant

    Hi Lion,

    ok, i will try,
    when i bitbake all system, i had seen that have opencv package install, but when i bitbake meta-toolchain, finialy i can’t see #include <opencv2/opencv.hpp> , how can i build the environment and use toolchain to compiler opencv code??

    in reply to: sd card booting error #390
    alexlin_1
    Participant

    Hi, Lion,

    it can’t use decompress the *.sdcrad.bz2?? and can’t use dd command??

    in reply to: bitbake toolchain error #388
    alexlin_1
    Participant

    after repo sync, bitbake toolchain is OK!

    in reply to: bitbake toolchain error #386
    alexlin_1
    Participant

    yes

    in reply to: bitbake toolchain error #383
    alexlin_1
    Participant

    ERROR: Task (/root/imx-yocto-bsp/sources/poky/meta/recipes-devtools/gcc/gcc-crosssdk-initial_7.3.bb:do_configure) failed with exit code ‘1’

    in reply to: wb10pevk #361
    alexlin_1
    Participant

    Hi,

    Q1 is ok!
    Q2 ??

    Br,

    AlexLin

Viewing 14 posts - 1 through 14 (of 14 total)